Product Code: TC6-FS TOYOCONNECTOR-TC6-FS

  • RoHS2 Certified

TOYOCONNECTOR TC6-FS Coupling (TOYOSILICONE Hose Series Dedicated)

A coupling for equipment and devices handling foods, beverages, chemicals and the like (Toyox hose genuine couplings)

TOYOCONNECTOR is a hose manufacturer designed coupling exclusively for TOYOX hoses.
* TOYOSILICONE Hose Series Dedicated.Check the compatible hoses.
(Material: SUS/Clamp type/Couplings Specification: Ferrule)

The structure that suppresses fluid accumulation is sanitary. Reduction of leakage and disconnection troubles will increase production efficiency. Reduction of piping work time and standardization of work.

It is recommended to select hoses suitable to the specific applications and conditions for improved food safety and productivity.

Electrolytic polishing is also available.Click here for details on target sizes, processing methods, etc.

◆ Click here for hose fittings with a hose ID of 15 to 25 mm
◆ Click here for a list of other hose fittings
◆ Click here for ferrule hose fittings except than silicone hoses

Important

*The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. Toyox makes no guarantee that the TOYOCONNECTOR will function properly if connected to another manufacturer’s hose.
*This coupling is not for routine disassembly cleaning.

  • Guidance
  • Coupling Design Chart
  • List of Compatible Hoses
Connection Surface Connection Method Inner Diameter for Hose (mm) / Coupling Specification
Hose Side Clamp 32,38,50
Device Side Ferrule 1.5S,2S
Product no. TC6-FS
Fluids Air Chemicals Drinking Water Foods Oils Water (Non-drinkable)
Primary Material SUS
Materials Detail Nipple: SCS16 (SUS316L equivalent)
Clamp: SCS14 (SUS316 equivalent)
Sleeve: PVDF
Spacer: PVDF
Washer (50 size only): PEEK
Bolt: SUSXM7 (SUS304 equivalent)
Bolt thread part lubricant: NSF "H1" registered grease
Functionality Easy to installPrevents leakage and disconnectionPrevents liquid poolingReusableStandardization of work
Certification RoHS2 (RoHS Revised) Certified

Feature:

  • Prevents leaks and disconnections

    Hose insertion is easy, and the clamp fits on with no gap, preventing hose disconnections and fluid leaks.

  • Labor savings

    Additional tightening is not needed for reduced maintenance.

  • Standardization of work (hyojunka)

    Easy attachment that only requires securely fastening the clamp.
    Hose insertion is simple and can be performed reliably and consistently no matter who does it.

  • Sanitary

    The shape of the nipple prevents liquid pooling, making it sanitary and perfect for conveying foods and beverages.

  • Can be installed on-site

    Unlike products requiring tightening, the hose length can be adjusted on-site for easy installation.

  • Waste reduction

    Coupling units can be reused, reducing waste and cutting costs.

  • Risk reduction

    This coupling prevents hose problems such as leaks and disconnections due to vibration. If there is an earthquake or other disaster, it is easy to restore everything back to working order.

  • Supports electrolytic polishing

    The wetted surface is made uniform to improve cleanability and prevent rusting and adhering of foreign matter.
    *Click here for details on target sizes, processing methods, etc.

Related Videos:

  • Comparison of pressure resistance and safety

  • Comparison of food safety

Schematic Drawing
Coupling Standards Chart · Schematic Drawing · TC6-FS
Part Number Applicable Hose Range of Temperature Coupling Specs Dimensions (mm) Weight Packing Unit
L Φd F A B C HEX g pc
TC6-FS32-1.5S TSI-32
HTSI-32
TSIS-32
-30~140 FERRULE 1.5S 76.0 26.0 86.0 50.5 43.5 35.7 6 575 4
TC6-FS38-1.5S TSI-38
HTSI-38
TSIS-38
81.0 32.0 94.0 50.5 43.5 35.7 6 695 4
TC6-FS50-2S TSI-50
TSIS-50
2S 93.5 44.0 113.0 64.0 56.5 47.8 8 1100 2
Nipple: SCS16 (SUS316L equivalent)
Clamp: SCS14 (SUS316 equivalent)
Sleeve: PVDF
Spacer: PVDF
Washer (50 size only): PEEK
Bolt: SUSXM7 (SUS304 equivalent)
Bolt thread part lubricant: NSF "H1" registered grease
Compatible Hoses : 3Hoses
Name
TOYOSILICONE HOSETOYOSILICONE-S HOSEHYBRID TOYOSILICONE HOSE
Material : SUS
Primary MaterialSiliconeSiliconeSilicone
Functionality
Chemical Resistant
Cold Resistant
Flexible
Heat Resistant
Low Elusion
Low Odor
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Pressure
Break Proof
Chemical Resistant
Cold Resistant
Flexible
Heat Resistant
Low Elusion
Low Odor
Oil Resistant (Animal and Vegetables)
Pressure
Vacuum
Break Proof
Chemical Resistant
Cold Resistant
Flexible
Heat Resistant
Low Elusion
Low Odor
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Pressure
Vacuum
Product no.TSITSISHTSI
CertificationFDARoHS2 CertifiedFDARoHS2 CertifiedFDARoHS2 Certified
Product CodeCompatible Hoses
Inner Diameter(mm)
Coupling Specification
TC6-FS32-1.5S321.5S
TC6-FS38-1.5S381.5S
TC6-FS50-2S502S-
TC6-FS Replacement Sleeve Set
Replacement Parts Part Number Packing Unit
pc
TOYOCONNECTORTC6-FS Sleeve TC6-FS32-S 4
TC6-FS38-S 4
TC6-FS50-S 2

 

Sleeve : PVDF

 

TC6-FS Replacement Clamp Set (without sleeve)
Replacement Parts Part Number Packing Unit
pc
TOYOCONNECTORTC6-FS Clamp Set TC6-FS32-CBSS 1
TC6-FS38-CBSS 1
TC6-FS50-CBSS 1

Clamp : SCS14 (SUS316 equivalent)

Spacer : PVDF

Washer ( TC6-FS50 only ) : PEEK

Bolt : SUSXM7 ( SUS304 equivalent )
Bolt thread part lubricant: NSF “H1” registered grease (extreme-pressure grease)

Attachment Method

1 Loosen the bolts and remove the clamp from the nipple.
2 Pass the hose through the sleeve.
*For optimal positioning, mark the hose as shown at right before passing the hose through the sleeve.
*If the edges are not flush where the sleeve ends meet, adjust them so that there is no overhang.
3 With the sleeve attached, insert the hose to the hose insertion position of the nipple.
4 Align the clamp to the nipple groove to initially connect them.
*If the spacer comes off of the bolt, re-attach the spacer to the bolt before making the initial connection to the clamp.
5 Alternately tighten the two bolts evenly until no gap remains.

Attachment Tool

Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-FS50) to finish tightening the bolt.